Brand New in Box BECKHOFF EL2809

Description

EL2809 | HD EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A
The EL2809 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2809 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. The power contacts are looped through.
The outputs are fed via the 24 V power contact in the EL2809. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.
The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.
Technical data
EL2809
Connection technology
1-wire
Number of outputs
16
Rated load voltage
24 V DC (-15 %/+20 %)
Load type
ohmic, inductive, lamp load
Distributed clocks
–
Max. output current
0.5 A (short-circuit-proof) per channel
Short circuit current
typ. < 2 A
Reverse voltage protection
yes
Breaking energy
< 150 mJ/channel
Switching times
typ. T
ON
: 60 µs, typ. T
OFF
: 300 µs
Current consumption E-bus
typ. 140 mA
Electrical isolation
500 V (E-bus/field potential)
Current consumption power contacts
typ. 35 mA + load
Bit width in the process image
16 outputs
Configuration
no address or configuration setting
Conductor types
solid wire, stranded wire and ferrule
Conductor connection
solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section
solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Weight
approx. 70 g
Operating/storage temperature
-25…+60 °C/-40…+85 °C
Relative humidity
95 %, no condensation
Vibration/shock resistance
conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission
conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.
IP 20/variable
Approvals
CE, UL, Ex